Medite IIMedite® II is the high performance workhorse of the Roseburg product line. Rigorously tested through a long résumé of applications around the world, Medite® II is proven to deliver superior design capabilities coupled with environmental stewardship. Medite® II represents the global environmental standard, matching aggressive MDF design capabilities with a formaldehyde free adhesive system.

  • No added formaldehyde (NAF) resin system
  • Superior physical properties to standard MDF. Truly high performance screwholding and MOR capabilities, among others.
  • Pre-consumer recycled wood content
  • FSC® Certified - available upon request
  • Potential LEED® 2009 credit support: MRc4, 5, 7 & IEQc4.4
  • Potential LEED® v4 credit support: Materials & Resources, Indoor Environmental Quality
  • Meets EPA Formaldehyde Emission Regulation, TSCA Title VI & CARB ATCM 93120 Phase 2 emission limits
  • No Added Formaldehyde (NAF) Exempt - State of California Executive Order N-18-313
  • Third party certification - SCS, ECC
  • CHPS Certified - California section 01350 approved

Manufacturing Locations & Capabilities

  • Medford, OR
  • Panels available in 4’ and 5’ widths, lengths up to 18’ and thicknesses ranging from 1/4” - 1-1/2”
  • Minimum order may be required for some sizes

Technical Data

Handling & Installation

  • Store indoors on a flat, level surface with adequate support to prevent sagging
  • Refer to Architectural Woodwork Standards (AWS) for fabrication and installation procedures
  • For best results, Medite® II should be conditioned to the environment 48-72 hours prior to installation

How to Specify

Industrial Grade Medium Density Fiberboard (MDF), manufactured with a formaldehyde-free adhesive system which meets the physical properties of ANSI A208.2 Grade 155.


Medite® II is not suitable for structural or exterior applications.



Sustainable AttributeSupporting DocumentationQualifying StatementApplicable Green Building
Standard or Credit

Certified Wood

SCS -CoC Certificate

When specified FSC® certified and purchased from a Chain of Custody certified supplier

LEED v3 (2009) - MRc7 - Certified Wood

LEED v4 - Building product disclosure and optimization - Sourcing of raw materials

Recycled Content

SCS Recycled Content Certificate

SCS Recycled Content Certificate for Medite FR and Arreis FR only

All Roseburg MDF products are third-party certified for pre-consumer recycled content.

LEED v3 (2009) - MRc4 Recycled Content

LEED v4 - Building product disclosure and optimization - Sourcing of raw materials

Low-emitting Material

NAF Exemption Verification-Medford

NAF Exemption Verification-Pembroke

Arreis, Medite II, Medex, Medite FR and Medite II 3D are no-added formaldehyde (NAF)

LEED v3 (2009) - EQc4.4

LEED v4 - Low emitting materials

CARB Compliance/ TSCA

TPC-1 ECC Third-party certification

CARB NAF Exemption - California Executive Order

Arreis, Medite II, Medex, Medite FR, Medite II 3D are CARB NAF Exempt


Regional Materials

Harvest and Manufacturing region - company letter

Qualifies when project is within 500 miles (LEED v3) or 100 miles (LEED v4) of Roseburg manufacturing and harvesting region

LEED v3 (2009) - MRc5 Regional Materials

LEED v4 - Building product disclosure and optimization

Environmental Product Declaration (EPD)

Roseburg verification document.

Industry-wide MDF EPD

MDF EPD Transparency Brief

Valued as 1/2 of a product. Use Verification document to demonstrate that Roseburg product qualifies for this credit.

LEED v4 - Building product disclosure and optimization - environmental product declaration

Ask your Roseburg MDF sales representative for more information.


Are you sure you want to approve this order?

Are you sure you want to deny this order?

Are you sure you want to modify this order?

Are you sure you want to modify this order?

To perform this action, you must either:
To perform this action, you must either: