Hardwood Plywood
Manufactured plywood panel made up of three or more layers, with a hardwood face species (like red oak, birch, walnut, maple and many more). The typical hardwood log produces a large amount of B- and C-grade material.
- Cabinetry
- Furniture
- Wall paneling
- Architectural casework
- Shelving and storage
- Superior quality and craftsmanship
- Hand selected hardwood veneers
- Ultra Low-Emitting Formaldehyde (ULEF)
- Dillard, OR
Roseburg is a leading manufacturer of domestic hardwood plywood with an offering that includes all of the common hardwood species. All of our hardwood plywood panels are made with a hand selected face veneer applied to either a softwood veneer or composite substrate. Note: Due to variations in browser and monitor settings, the images shown may vary from the actual product. For actual samples from our line of products, please contact your local Roseburg distribution partner or click on ORDER SAMPLES & LITERATURE at the top of the menu bar.SkyPly® Veneer Options
Plain Sliced Veneer (PS) The half log, or flitch, is mounted with the heart side flat against the flitch table of the slicer. The slicing is done parallel to a line through the center of the log to produce a distinct figure. Rotary Whole Piece Face Veneer (R) The entire log is cut or “peeled.” It can yield full sheets of veneer with broad grain pattern and no plain or quarter-sliced appearance. Quarter Sliced Veneer (QTR) Quarter slicing produces a series of stripes — straight in some woods, varied in others. A flake pattern is produced when slicing through medullary rays in some species, principally oak. Most species produce the same look as rift cut.
Veneer Hardwood Cross Band (HXB) CFC Particleboard Multi-layered substrate, produced using a blend of western softwoods. The core consists of pre-consumer recycled wood fiber. The combination of sanding to extremely smooth, tight and grainless surfaces on both sides, with a controlled distribution pattern of particles in the core, results in a dimensionally stable panel. Medium Density Fiberboard (MDF) RediBead RediBead panels have a traditional beaded-board appearance (1-1/2” on center) and can be used for cabinet doors and backers, wainscoting, wall paneling and any other interior design application where the warmth and beauty of beaded hardwood is desired. RediFinish A factory pre-finish UV coating that has zero VOC emissions and is regularly tested to ensure compliance with KCMA standards. RediFinish creates a scratch- and mar-resistant panel that is available in four standard gloss levels*. *custom gloss reflection levels are available within +/- 5% reflectivity with a 200 face minimum orderSkyPly® Core Options
Constructed using innerplies composed of western softwoods. Veneer core panels are lightweight, dimensionally stable and have excellent screwholding capacity.
Combines the smooth finish of a hardwood veneer crossband beneath the hardwood face and back with the strength and durability of western softwood veneer innerplies. Together they create an excellent hardwood plywood panel that is smoother and has less potential for core telegraphing.
Combination Fiber Core (CFC) combines MDF crossbands with softwood veneer innerplies. The MDF crossbands provide an ultra smooth surface to reduce telegraphing through the face, while the veneer innerplies maintain the strength and screw-holding power of a veneer core panel. This option is recommended for high-end veneers.
Makes for a very smooth, consistent panel. This is a great substrate for high-end veneer and for applications when routing and shaping are required. The MDF core consists of pre-consumer recycled wood fiber. Also available from Roseburg are the most widely specified MDF brands in North America such as Arreis, Medex, and Medite FR (please use registered marks on these brand names)Panel Options and Finishes
Sustainability
- Environmental Product Declaration – Type III product-specific EPD verified by UL Environment
- Leadership in Energy and Environmental Design® LEED® v4 Credit Support
- LEED® v4 Low-emitting materials
- Sustainable Forestry Initiative® (SFI) program – certified available
- Forest Stewardship Council® (FSC®) – certified available (FSC-C017580)
- UL GREENGUARD Certified
- CARB ULEF Exempt/TSCA Title VI compliant
- Pre-consumer recycled content (composite core panels)
Product Educational
Resources
Roseburg offers a library of educational resources on a wide range of topics. Learn about what we believe in, how our products are made, and how we’re meeting or exceeding the certifications on each and every one of our products.