Overview Specifications

Medite Lite logoMedite® Lite is the newest addition to our comprehensive list of innovative MDF products. This panel product is engineered for applications where an economical lower density product is desirable. Medite Lite is manufactured from pre-consumer recycled wood content.

  • Meets EPA Formaldehyde Emission Regulation, TSCA Title VI & CARB ATCM 93120 Phase 2 emission limits
  • FSC® Certified- available upon request

Medite Lite panel products are engineered for applications where an economical lower density product is desireable.

Manufacturing Locations & Capabilities

  • Medford, OR
  • Panels available in 4’ x 8’ sheets
  • Panels available in thicknesses ranging from 1/2” to 3/4”

Handling and Storage

  • Store indoors on a flat, level sur face with adequate support to prevent sagging
  • Medite Lite is not suitable for exterior use, structural applications or in areas where moisture is a concern
  • Refer to Architectural Woodwork Standards (AWS) for fabrication and installation procedures
  • For best results, condition to the environment 48-72 hours prior to fabrication

Applications

  • Casework
  • Furniture

 Sustainability

Sustainable AttributeSupporting DocumentationQualifying StatementApplicable Green Building
Standard or Credit

Certified Wood

SCS -CoC Certificate

When specified FSC® certified and purchased from a Chain of Custody certified supplier

LEED v3 (2009) - MRc7 - Certified Wood

LEED v4 - Building product disclosure and optimization - Sourcing of raw materials

Recycled Content

SCS Recycled Content Certificate

SCS Recycled Content Certificate for Medite FR and Arreis FR only

All Roseburg MDF products are third-party certified for pre-consumer recycled content.

LEED v3 (2009) - MRc4 Recycled Content

LEED v4 - Building product disclosure and optimization - Sourcing of raw materials

Low-emitting Material

SCS NAF Certificate

Arreis, Medite II, Medex, Medite FR and Medite II 3D are no-added formaldehyde (NAF)

LEED v3 (2009) - EQc4.4

LEED v4 - Low emitting materials

CARB Compliance/ TSCA

TPC-1 ECC Third-party certification

CARB NAF Exemption - California Executive Order

Arreis, Medite II, Medex, Medite FR, Medite II 3D are CARB NAF Exempt

 

Regional Materials

Harvest and Manufacturing region - company letter

Qualifies when project is within 500 miles (LEED v3) or 100 miles (LEED v4) of Roseburg manufacturing and harvesting region

LEED v3 (2009) - MRc5 Regional Materials

LEED v4 - Building product disclosure and optimization

Environmental Product Declaration (EPD)

Roseburg verification document.

Industry-wide MDF EPD

MDF EPD Transparency Brief

Valued as 1/2 of a product. Use Verification document to demonstrate that Roseburg product qualifies for this credit.

LEED v4 - Building product disclosure and optimization - environmental product declaration

WHEN AND WHERE YOU NEED IT

Roseburg Medium Density Fiberboard (MDF) is available throughout North America at some of the largest and most respected wholesale distributors, retail building material dealers and home centers. Find a distributor near you.

 

Ask your Roseburg MDF sales representative for more information.

Medite Lite panel products are engineered for applications where an economical lower density product is desireable.

Features and Benefits

  • Medite Lite is produced in Medford, OR and manufactured from pre-consumer recycled wood content.
  • Product meets CARB ATCM 93120 Phase 2 emission requirements
  • Smooth surface accepts many finishes including: paint, varnish, lacquer, UV-fills, laminates and foils
  • Meets physical properties of ANSI A208.2 Grade 115
  • FSC® certified panels available upon request

Mill Capabilities

  • Panels available in 4’ x 8’ sheets
  • Panels available in thicknesses ranging from 1/2” to 3/4”

Handling and Storage

  • Store indoors on a flat, level sur face with adequate support to prevent sagging
  • Medite Lite is not suitable for exterior use, structural applications or in areas where moisture is a concern
  • Refer to Architectural Woodwork Standards (AWS) for fabrication and installation procedures
  • For best results, condition to the environment 48-72 hours prior to fabrication

Applications

  • Casework
  • Furniture

 

Ask your Roseburg MDF sales representative for more information.

Loading...

Are you sure you want to approve this order?

Are you sure you want to deny this order?

Are you sure you want to modify this order?

Are you sure you want to modify this order?

To perform this action, you must either:
To perform this action, you must either: